I’m really getting into this blogging stuff. I realised that it doesn’t really have to do with our core business, just as long as its fun and I can justify that at least SOME of our customers will find it useful
Ever since a young age, I’ve been into model railways. I used to have a huge 18 foot by 9 foot OO gauge layout in the attic at my mum and dads house and I spent many hours getting everything looking nice. When I was about 16 I realised that there was a couple of things that were much better fun than model railways – Beer and Girls – so I sold it all.
Now that I am older, the novelty of beers has worn off and the “girls” have turned into just the one girl – my wife. In addition, we have a wee boy who is obsessed with trains and so I started to rekindle my interest in the hobby again.
I decided that the perfect scale to be workable with would be N gauge. Everything is about half the size of OO, so you can fit quite a complex layout in a very small space, say about 6 foot by 4 foot.
My first attempt was a disaster. I tried to make it too complicated. I had what was effectively 6 lanes of tracks, the inner track having a radius so tight that long locos couldn’t travel round it. I knew I wanted DCC (Digital Command and Control) control so that I could control more than one train on the same piece of track independently. I thought I also wanted to use Peco finescale code 55 track, with electrofrog points, for better realism.
But when it came to wiring up the points it was just a pain. What should have been a fun past-time turned into more of a chore. For example, to use a scissor crossover with DCC, I had to fit two microswitches to the turnout bars and at last count I had 22 wires soldered onto that one piece of track so I could swap polarity as the trains passed over.
I know there were many other ways I could have tackled this problem – an auto reverser module, for example, but by this point I had all the track pinned to the boards and I was having to desolder joins to get access to the back of the track. Bad planning.
I decided to rip it all up and start again. This time I was going to admit to myself that I wasn’t building a super realistic detailed model of a real railway – I was just building something that would give me and my Son lots of fun over the coming years.
I settled upon using the Kato Unitrack system. This has track already sitting on a piece of plastic moulded underlay – something that I would have never thought would look in any way good, but the Kato Track is fantastic looking in my opinion and very reasonably priced.
The other bonus of Kato Unitrack is that the points have the motors for electrical control already built in! This means that the KATO scissors crossover has only 2 wires coming out of it, instead of the 22 I had previously with the PECO setup.
I planned a simple layout that would give me three trains running at the same time using AnyRail 5 software – the trial version. With the trial you only get to lay 50 pieces of track, but by designing your layout in a few different sections, you can still make use of it.
Once I had the plan finalised, AnyRail gives you the complete shopping list of parts to buy. To get round my wife, I bought all the track in three smaller purchases, rather than altogether:). I bought all of my KATO parts from Keith Blanchard at http://www.traintrax.co.uk because I could speak to him on the phone for advice and everything I needed was in stock at great prices.
So, to the build.. I took some step by step pictures. The build is nowhere yet near complete but I went from an empty attic to something my Son and I can play with and add to within about 3 weeks – not too bad.
Pic 1. First thing was to build a base board. I used CLS for the legs and frame and then used 9mm MDF as the base. Building the frame securely is important to ensure that the baseboard won’t sag over time. I then painted the whole surface of the MDF with Solvent based green paint to protect the MDF from any water ingress from Paper mache etc at later stages – since MDF is fibre board it will swell up if wet. I put castors on each leg – doesn’t help with stability but makes it a dream to slide the baseboard around the attic so I can get access where the roof slopes. The baseboard is 1metre x 2.4metres.
Pic 3. 9mm MDF pinned around back and edges of board. Starting to plan for a tunnel in the back quarter. Note that there are cutouts in the MDF so you can get your hand in to pull a derailed train out!
Pic 4. Using newspaper wads, dry but secured with tape, we bulked up the open spaces at the edge of the incline risers. Also, using polystyrene sheets, we created the retaining walls at the edge of the hill, where the mainline was going.
And that is as far as we have got, so far. The woodland scenic materials are great. As you scatter the grass on and add more and more detail it suddenly goes from looking terrible to looking real!.
This layout is crying out for an Arduino control system. Having all the locos and points DCC controlled means that every item has its own address that can receive commands. Roy, our tech guru has already built a wireless DCC controller for the system. The next stage is to program a few Arduino UNOs, so that myself and my son can sit back and watch the points switch and the trains starting and stopping at the station by magic. If I can get Roy to stop playing with his Raspberry Pi for long enough to get the code written!